In order to keep your skates rolling smoothly, it’s a good idea to clean and lubricate the bearings of your wheels. Most roller hockey wheel bearings are sealed, which makes them hard to clean, but with the right tools and a little patience, it’s easy to do.
This article aims to teach you how to clean roller hockey bearings, as well as how to replace them. The process is simple and can save you money in the long run. So grab some paper towel holders and let’s get started!
If you simply want your bearings to stop squeaking, here’s a quick fix: take a couple of paper towel holders and place them on either side of the bearing. Then, use a hammer to tap the two towel holders together. This will create friction, which will inhibit the ball bearings from making noise as they move around. Sometimes this fix alone is enough to do the trick!
Another method for fixing your roller hockey bearings involves removing the wheels from your skates entirely. With its wheels removed, your skate will look like it has no wheels at all—you can tell where the wheels should be because there are small holes in each of those spots. You’ll need a bearing puller to remove them (you can buy these at any skate store). To use one, press it into the larger hole on either side of the wheel until you hear a distinct cracking sound. Then pull straight down on both sides at once and out it will come!
2. 이 과정에 필요한 것들로는 베어링 풀러, 베어링 프레스, 페이퍼 타월 홀더 등이 있습니다.
3. 휠 풀러를 사용하여 스케이트에서 휠을 분리합니다.
4. 바퀴를 토우 스톱 아래에서 지면으로 밀어내어 바퀴에서 베어링을 제거합니다.
5. 처음 제거할 때처럼 옆이 아닌 위아래를 향하도록 90도 회전합니다.
6. 휠을 새 베어링으로 교체하고 다시 하키를 즐기세요!
베어링에 대한 자세한 내용은 당사 사이트를 방문하십시오. Bushingmfg.com