In order to keep your skates rolling smoothly, it’s a good idea to clean and lubricate the bearings of your wheels. Most roller hockey wheel bearings are sealed, which makes them hard to clean, but with the right tools and a little patience, it’s easy to do.
This article aims to teach you how to clean roller hockey bearings, as well as how to replace them. The process is simple and can save you money in the long run. So grab some paper towel holders and let’s get started!
If you simply want your bearings to stop squeaking, here’s a quick fix: take a couple of paper towel holders and place them on either side of the bearing. Then, use a hammer to tap the two towel holders together. This will create friction, which will inhibit the ball bearings from making noise as they move around. Sometimes this fix alone is enough to do the trick!
Another method for fixing your roller hockey bearings involves removing the wheels from your skates entirely. With its wheels removed, your skate will look like it has no wheels at all—you can tell where the wheels should be because there are small holes in each of those spots. You’ll need a bearing puller to remove them (you can buy these at any skate store). To use one, press it into the larger hole on either side of the wheel until you hear a distinct cracking sound. Then pull straight down on both sides at once and out it will come!
2. Pour ce faire, il faut notamment un extracteur de roulements, une presse à roulements et un porte-essuie-tout.
3. Utiliser un extracteur de roue pour retirer la roue du patin.
4. Retirez le roulement de votre roue en faisant glisser la roue hors de sous votre butée de pied et sur le sol.
5. Faites-le pivoter de 90 degrés pour qu'il soit orienté vers le haut et le bas, et non plus sur le côté comme lorsque vous l'avez retiré pour la première fois.
6. Replacez votre roue avec ses nouveaux roulements et profitez à nouveau du hockey !
Pour plus d'informations sur les roulements, veuillez consulter notre site Bushingmfg.com
Un manchon de palier, souvent appelé palier lisse, est un type de palier...
Les bagues métalliques, également connues sous le nom de limiteurs de couple, sont des composants cylindriques ressemblant à de minces tubes qui améliorent...
Les bagues en bronze sont des composants cylindriques qui fournissent une surface à faible frottement pour les pièces rotatives ou coulissantes....
Les vérins hydrauliques sont des composants essentiels d'une large gamme de machines, convertissant l'énergie...
Une bague en bronze est un type de palier lisse en bronze, couramment utilisé pour...
Le laiton naval est un alliage de cuivre composé d'environ 59% de cuivre, 40% de zinc et 1%...