In order to keep your skates rolling smoothly, it’s a good idea to clean and lubricate the bearings of your wheels. Most roller hockey wheel bearings are sealed, which makes them hard to clean, but with the right tools and a little patience, it’s easy to do.
This article aims to teach you how to clean roller hockey bearings, as well as how to replace them. The process is simple and can save you money in the long run. So grab some paper towel holders and let’s get started!
If you simply want your bearings to stop squeaking, here’s a quick fix: take a couple of paper towel holders and place them on either side of the bearing. Then, use a hammer to tap the two towel holders together. This will create friction, which will inhibit the ball bearings from making noise as they move around. Sometimes this fix alone is enough to do the trick!
Another method for fixing your roller hockey bearings involves removing the wheels from your skates entirely. With its wheels removed, your skate will look like it has no wheels at all—you can tell where the wheels should be because there are small holes in each of those spots. You’ll need a bearing puller to remove them (you can buy these at any skate store). To use one, press it into the larger hole on either side of the wheel until you hear a distinct cracking sound. Then pull straight down on both sides at once and out it will come!
2. Für diesen Vorgang benötigen Sie unter anderem einen Lagerabzieher, eine Lagerpresse und einen Papierhandtuchhalter.
3. Verwenden Sie einen Radabzieher, um das Rad vom Schlittschuh zu entfernen.
4. Entfernen Sie das Lager von Ihrem Rad, indem Sie das Rad unter dem Zehenanschlag herausziehen und auf den Boden stellen.
5. Drehen Sie ihn um 90 Grad, so dass er nach oben und unten zeigt, anstatt zur Seite, wie beim ersten Entfernen.
6. Setzen Sie Ihr Rad mit den neuen Lagern wieder ein und genießen Sie wieder Hockey!
Für weitere Informationen über Kugellager besuchen Sie bitte unsere Website Bushingmfg.com
A bearing sleeve, often referred to as a sleeve bearing, is a type of plain bearing that…
Metal bushings, also known as torque limiters, are cylindrical components resembling thin tubes that enhance…
Bronze bushings are cylindrical components that provide a low-friction surface for rotating or sliding parts.…
Hydraulic cylinders are essential components in a wide range of machinery, converting the energy from…
A bronze bushing is a type of plain bearing made from bronze, commonly used to…
Naval brass is a copper alloy consisting of approximately 59% copper, 40% zinc, and 1%…